Author Topic: ANYONE EVER USE  (Read 1120 times)

Offline VINNY

  • Hero Member
  • *****
  • Posts: 732
    • http://
ANYONE EVER USE
« on: March 04, 2010, 03:16:00 PM »
Beeman coated pellets? If so, oppinions? OOOPS! Wrong pic. Same pellets only coated.
Daisy-Red Ryder,2-15XT pistols,Powerline 1200 pistol/Crosman-Quest 1000,Powermaster 66, 1377 pistol,Pumpmaster 760, 1077 AS/Gamo-Big Cat,Viper Express,CFX in.177,CFX-.22 [Finally!!] Varmint Hunter / 1971 Benjamin 132/ 4 Cummins b-3\'s./ Walther -Falcon hunter .22, Force 1000-.177/Baikal- MP512M-.22/ Winchester -800x-.177/Baretta-92FS,EliteII/Hammerli- 490 Express

Offline LongIslandArcher

  • Sr. Member
  • ****
  • Posts: 341
    • http://
Re: ANYONE EVER USE
« Reply #1 on: March 04, 2010, 03:37:47 PM »
I only have the coated pellets in .177 cal.  Don't think Beeman makes them in .22 cal.  Out of my friend's CFX, the .177 cal. coated pellets are grouping 1" at 35 yards.  Mind you, his CFX still has the stock spring and hasn't been tuned (which I will have to do when I go visit).  I have not shot the coated pellets from my CFX with a gas ram yet.  I plan on doing that tomorrow.

Offline Mark 611

  • Sr. Member
  • ****
  • Posts: 494
    • http://Yahoo.com
Re: ANYONE EVER USE
« Reply #2 on: March 04, 2010, 10:57:08 PM »
The pellets in the pic I've used in a B25 with very good success as a hunting pellet they group under3/4'' at 30yds but did better when I did my part and about 1/2'' out of my m48 both .22cals, But I will say out of the B25 with a 30yd zero it had a loopy flight path and took a mildot to get out to 40-45 yds but anything I hit droped dead with out much strugle that said the 30 to 45 yd zone seemed to be optimal range for this rifle an pellet weight combo at around 700fps, anything under 30yds it shoots way high over the target.