Author Topic: hpa Repeaters  (Read 1557 times)

Offline goodgroup

  • GTA Donations
  • ******
  • Posts: 44
hpa Repeaters
« on: October 18, 2008, 04:38:49 PM »


For For those of you thinking of going the HPA route.
Here are a couple of my rifles modified for HPA. The top one is an RWS 850 modified to shoot from a remote HPA tank. I am using a 72 CI 3000 psi tank with a reg pressure of 850 PSI. Other than that the rifle is stock and shoots 14.3 g CFP's at around 680f/s. The adapter I made unscrews to allow normal use with co2 AS tanks . When used with a remote you can keep track of gun air pressure (Regulated pressure )via the gauge which is visible thru the cutout in the bottom of the forestock. The gauge on the tank shows tank pressure. The side cutout allows plugin of the QD to the remote line. I am guessing I get over 300 good shots on the 72 CI tank. I always loose count. The compenstors on both rifles are made by RWS and are sleeved. The lower one is a Mike Melick QB79 running on 850 PSI HPA with a 13 ci tank in .22 cal. It shoots 14.3's around 680f/s as well if memory serves me. It has the
8 shot RIM repeating magazine installed. Both are accurate and fun to shoot. Both are backyard friendly and now go thru pellets in a hurry.I got both tanks from Action Village on Amazon. The 13 Ci tank shown on the QB was $69.00 with the regulator.



Thanks



Jay