« previous next »
Pages: [1]   Go Down

Author Topic: LEAPERS BIPOD  (Read 1851 times)

Offline melloroadman

  • Hero Member
  • *****
  • Posts: 1449
    • http://
LEAPERS BIPOD
« on: November 25, 2008, 02:51:16 AM »
Has any one tried this bipod . And what are your thoughts .Marvin
http://www.pyramydair.com/cgi-bin/accessory.pl?accessory_id=1624
Logged

Offline Graham

  • Sr. Member
  • ****
  • Posts: 276
    • http://
Re: LEAPERS BIPOD
« Reply #1 on: November 25, 2008, 02:56:21 AM »
Fine, if it's on a PCP. Bipods don't work on springers!
Logged

Offline tonaka

  • Full Member
  • ***
  • Posts: 208
    • http://tolikstf@gmail.com
Re: LEAPERS BIPOD
« Reply #2 on: November 25, 2008, 03:21:52 AM »
Yeeh that's nice one I think. Anyway I trust Leapers products. It just my personal opinion.I was looking for bipod for my new Condor and I just cannot agree with price of AirForce bipod. Too darn expensive for me. And I was looking at this bipod and because it has pocatiny type clamp I rejected it, but now as you mentioned it, I looked up the PA and found picatiny mount adapter for only $10. I think I am going to get it.
 Thank you for pointing me out unintentionally in that direction by your post
Logged

Offline preez

  • Hero Member
  • *****
  • Posts: 605
    • http://
Re: LEAPERS BIPOD
« Reply #3 on: November 25, 2008, 04:03:34 AM »
Marvin, look into Harris bipod knock- offs from Walmart ($39) They seem sturdier and mount better on AF guns, if that's your purpose.

HTH

Chris
Logged
Bam B-26 .22, Hammerli 850 .22 HPA, Marauder .22

LITTLE HUMILITY GOES A LONG WAY!!!!!!!!! - Joe Cuz

Offline tonaka

  • Full Member
  • ***
  • Posts: 208
    • http://tolikstf@gmail.com
Re: LEAPERS BIPOD
« Reply #4 on: November 25, 2008, 04:16:30 AM »
How do you mount that Wal Mart bipod on to AF rifle? It looks like it is made for firearms to screw that bipod to wood stock. At least it looks like it but I might be wrong.
Logged

Offline preez

  • Hero Member
  • *****
  • Posts: 605
    • http://
Re: LEAPERS BIPOD
« Reply #5 on: November 25, 2008, 04:33:02 AM »
You replace one of the bottom barrel bushing screws with a sling stud of the same thread size, also from walmart. Here's the linky:

http://talonairgun.com/forum/viewtopic.php?t=4709&highlight=harris

Chris
Logged
Bam B-26 .22, Hammerli 850 .22 HPA, Marauder .22

LITTLE HUMILITY GOES A LONG WAY!!!!!!!!! - Joe Cuz

Offline melloroadman

  • Hero Member
  • *****
  • Posts: 1449
    • http://
Re: LEAPERS BIPOD
« Reply #6 on: November 25, 2008, 04:47:19 AM »
Chris I have a A.F. bipod ordered that should be here tomorrow . But I was thinking about my Discovery and thought about mounting a 11 M.M. dove tail on the stock  so I could use the A.F. pod on it . Then I saw the price of this but I also noted that it is 2 inch's shorter than the A.F . pod . and wondered if that would be a concern or not as well . I will look at the Wally world one as well . But A 3 inch tail on the stock might be the way to go for me . I know not the stock . But its only one more hole over the swivel mount and its only a Crosman $52.09 stock . But more info and laughter is welcomed  . Marvin
Logged

Offline tonaka

  • Full Member
  • ***
  • Posts: 208
    • http://tolikstf@gmail.com
Re: LEAPERS BIPOD
« Reply #7 on: November 25, 2008, 05:27:24 AM »
Thank you Chris!
Logged
Pages: [1]   Go Up
« previous next »