Author Topic: Wood Work on 1377  (Read 2957 times)

Offline jejones1

  • Full Member
  • ***
  • Posts: 157
Wood Work on 1377
« on: January 15, 2007, 01:37:42 PM »
Don't know if woodwork goes in this forum.  Here are some custom grips and a pumper I made for my Dad's old Crosman 130 after MAc1 did some excellent work on the inards. I reworked the bluing and touched up and replaced some nasty screws as well.


Offline Gene_SC

  • Hero Member
  • *****
  • Posts: 11378
Re: Wood Work on 1377
« Reply #1 on: January 15, 2007, 01:46:19 PM »
Wood work sure does Jones. Nice handy work there on your 1377. Glad you made a post here in the Shop. There are some very talented people on the GTA who are very good with wook..

THE ONES I SLEEP WITH: BSA Lightning XL, AA TX-200, AA ProSport, BSA Ultra, HW-97K, Crosman NPSS .177, FX Cyclone, HW-30 Nicle Plated, AA-S200, Crosman Marauder, CZ-634, R-9 DG, Webley/Scott UK Tomahawk, Benji Kantana, Benji Marauder, Benji Discovery.....

Gene\'s Tunz n Toyz
Springer Tunin

Offline shadow

  • Hero Member
  • *****
  • Posts: 11453
RE: Wood Work on 1377
« Reply #2 on: January 15, 2007, 01:49:05 PM »
FAT AND SASSY, nice work Jeff. I think it's all good in The Shop, where do we all go to do our thing. The Shop! keep em coming, Ed
I airgun hunt therefore I am... };)  {SHADOWS Tunes & Camo}

Offline DanoInTx

  • Hero Member
  • *****
  • Posts: 3010
Re: Wood Work on 1377
« Reply #3 on: January 15, 2007, 03:39:56 PM »
Yuppems, wood, sheet metal, and machining, whatever you might do in your shop we discuss here.  I like those early variant 1377's, I made a 1322 a couple months ago, but it was completely from new store bought stuff...and wood.  Here's the one that used to be mine:

I also have a Walnut 2260 thumbhole stock in the making out in the garage, it should be done by the end of the week...end:)  Will post some pics when I finish.  There's also some pics of a "2360" I built my wife for Christmas in my album.  I like making wood stuff for these things, I actually enjoy that as much as shooting them.  It's great relaxation holding a chunk of wood, a dremel, some files and sandpaper and just imagining what you can come up with.  I only get that same feeling from one other thing, a nice hardy chunk of sheet metal.  Enjoy this "Gate", it's just starting out, but I'm thinking it's going to be a ton of fun!  Keep it up, it looks great.


Current shooters: Beeman HW97K .177 with Hawke Eclipse 4x16x50SFAO and Steve C. stock, Beeman R9 .177 with Hawke Airmax 4-12x40AO and Gene\'s Midas touch, Air Arms S200 with Bushnell Banner 6x24x40AO Rowan brass bling and Steve C. custom stock, BAM B25, BAM B40 .177 with BSA 3x12x44AO, Benjamin Marauder .22, Benjamin 397 pumper.

\"repeat this mantra:
Air gunzzzzzz, air gunzzzzzz, air gunzzzzzzz!!!  ...You will feel better\" T.E.C.2008