Author Topic: .22 Barrel Wanted  (Read 2940 times)

  • Guest
.22 Barrel Wanted
« on: January 22, 2007, 05:03:13 AM »


Does anyone have a .22 barrel that I could use on my Gladi8or as the stock one is too long, It needs to be 19" minimum and 16mm diameter although I can adapt it to fit if it is smaller or machine it if it is bigger.



Thanks



Jon


Offline DanoInTx

  • Hero Member
  • *****
  • Posts: 3010
    • http://airgunartisans.com
Re: .22 Barrel Wanted
« Reply #1 on: January 22, 2007, 01:33:31 PM »
Might want to put this one in the classifieds, should get better luck there.  BTW: Can't you cut down and recrown the barrel you have that's too long?

Good luck!

Dan
Dan

Current shooters: Beeman HW97K .177 with Hawke Eclipse 4x16x50SFAO and Steve C. stock, Beeman R9 .177 with Hawke Airmax 4-12x40AO and Gene\'s Midas touch, Air Arms S200 with Bushnell Banner 6x24x40AO Rowan brass bling and Steve C. custom stock, BAM B25, BAM B40 .177 with BSA 3x12x44AO, Benjamin Marauder .22, Benjamin 397 pumper.

\"repeat this mantra:
Air gunzzzzzz, air gunzzzzzz, air gunzzzzzzz!!!  ...You will feel better\" T.E.C.2008

  • Guest
Re: .22 Barrel Wanted
« Reply #2 on: January 22, 2007, 04:55:16 PM »
You can get new target barrels directly from Lothar Walther up to 24 inches long, they have .25 caliber barrels also. From 14 mm to 17 mm diameters.

here     http://www.lothar-walther.de/html/262.php

  • Guest
Re: .22 Barrel Wanted
« Reply #3 on: January 22, 2007, 07:24:39 PM »
Hi Dan

I thought I would ask you guys in here as you are more likely to know where I can find one. The gladiator has a lifetime warranty so I don't want to chop the stock barrel and invalidate it. I'll contact Walther but I bet they are really expensive.

Thanks

Jon