Author Topic: My Disco Chrony Numbers (Read 5453 times)

ShadowShot · « **on:** May 28, 2009, 11:05:30 AM »

I figured I would get a better responce here.

I just received my F1 chrony today.
I pumped my Disco up to 2100 Psi
And started a 25 shot string down to 1100 PSI

I started at 866.6 and ended at 852.1.
Highest number was around shot 15 at 919.3.
Does this sound right. I have a power adjuster and
have it turned in until I felt it make pressure on the
spring and then turned it in 1 more complete turn.

Here is my shot string. Does this sound right?
I am using .22 CPL 14.3 grn

1- 866 Start PSI 2100
2- err
3- 872
4- 884.8
5- 874.8
6- 899.9
7- 897.3
8- 900.8
9- 906.1
10- Err
11- 914.2
12- 914.2
13- 918.5
14- 914.2
15- 919.3
16- 914.5 around 1500 to 1600 psi
17- err
18- err
19- 902
20- 909.6
21- err
22- 886.7
23- 872.6
24- err
25- 852.1 at 1100 psi.

ShadowShot

longislandhunter · « **Reply #1 on:** May 28, 2009, 01:52:05 PM »

They look like decent numbers to me with a good curve....

Jeff

ZITRO · « **Reply #2 on:** May 29, 2009, 08:14:46 AM »

Those are great numbers, 25 good shots,.
I decide to get one my self and it just arrived :) .
I will not test it untill I install all the bells and whistles , custom stock, LDC , B. Band , trigger job and sling.
I assume that's a .22 cal right ?

ShadowShot · « **Reply #3 on:** May 29, 2009, 08:44:14 AM »

.22 You can see it here---My Disco

ZITRO · « **Reply #4 on:** May 29, 2009, 08:51:00 AM »

That's a different version, it looks nice .
It is different to what I've seen so far in customized Discos.
what about accuracy and how loud is it with that full shroud ?

ShadowShot · « **Reply #5 on:** May 29, 2009, 08:55:20 AM »

Stacks pellets easily at 20 yards.
Very quit. I made the stock.

SAVAGESAM · « **Reply #6 on:** May 31, 2009, 02:05:28 AM »

Quote

ShadowShot - 5/29/2009 1:55 PM

Stacks pellets easily at 20 yards.
Very quit. I made the stock.

Where did you get the shroud? I'd like to get one for my son. T.I.A.

cokezero · « **Reply #7 on:** May 31, 2009, 05:55:13 PM »

why around 1600 PSI do you get your highest FPS? can someone explain why at 2100PSI you get less FPS then at 1600PSI?

preez · « **Reply #8 on:** June 01, 2009, 11:45:55 AM »

It's called valve lock John. Too much pressure behind the valve prevents it from opening for longer. That's why PCP's have "power curve". There was a blog on Pyramyd Air explaining basic terms of PCP rifles, maybe someona has the link.

Chris

spark22 · « **Reply #9 on:** June 01, 2009, 01:13:26 PM »

those are good numbers!I have mine set to shoot from 835 up to 855 and down to 830fps and I,m getting 45 shots from a 2100 psi fill down to 900 I have had her up to 2500psi put the 1st 10 shots were down in the 700's. I like the shot count and it stacks pellets just fine out to 75 yrds with ease so I realy don't crank it up unless I have to make a realy long shot.

ShadowShot · « **Reply #10 on:** June 01, 2009, 02:03:57 PM »

Quote

SAVAGESAM - 5/31/2009 10:05 AM
Quote
ShadowShot - 5/29/2009 1:55 PM Stacks pellets easily at 20 yards. Very quit. I made the stock.
Where did you get the shroud? I'd like to get one for my son. T.I.A.

Sorry for the delay.
I have been buisy or very tired from work.
We have two service techs covering a 4 man area.

As for the shroud, It is a full TKO shroud with the rjmachine riser.
I really don't know where to get it. It was on the rifle when I bought it.
If I find out I will post back and let you know.

ShadowShot

ShadowShot · « **Reply #11 on:** June 01, 2009, 02:05:57 PM »

Yes this is a .22 cal.
I hope you get as much enjoyment from yours as I have mine.

GTA

News: