Author Topic: 3000 vs 4500 tanks  (Read 1314 times)

Offline Dust

  • Full Member
  • ***
  • Posts: 168
    • http://
3000 vs 4500 tanks
« on: July 18, 2009, 03:09:58 PM »
I was told by a member on another website that a 4500 psi is more dangerous, and is not needed.  That said, there seem to be a few floating around in the Austin area on Craigslist.  I am trying to get all of the HPA stuff together for when I get back this winter, but I was wondering if anyone had any comments on the 4500 psi being too much.

Offline Gene_SC

  • Hero Member
  • *****
  • Posts: 11378
    • http://www.airguntoys.com
Re: 3000 vs 4500 tanks
« Reply #1 on: July 18, 2009, 11:08:23 PM »
As long as they pass the visual and the pressure test, they should be good. The problem with them is it is hard to find a source that will fill them to 4500 psi. You can find that any scuba shop will fill a 3000 psi scuba tank. If your PCP needs a higher fill than 3000 psi then the 4500 psi tank is the way to go.

All of your big bore guys use the 4500 psi tanks. But you can get many more fills from this tank with PCP's that only require a 3000 psi fill. That equates to fewer trips to the tank's fill station source.
THE ONES I SLEEP WITH: BSA Lightning XL, AA TX-200, AA ProSport, BSA Ultra, HW-97K, Crosman NPSS .177, FX Cyclone, HW-30 Nicle Plated, AA-S200, Crosman Marauder, CZ-634, R-9 DG, Webley/Scott UK Tomahawk, Benji Kantana, Benji Marauder, Benji Discovery.....
....

Gene\'s Tunz n Toyz
Springer Tunin

Offline Dust

  • Full Member
  • ***
  • Posts: 168
    • http://
Re: 3000 vs 4500 tanks
« Reply #2 on: July 18, 2009, 11:44:05 PM »
I am thinking about a 177 or 22 in HPA or PCP, and a big bore for pigs and dogs, but haven't narrowed down the big bore yet.  Is there any We fill to 4500 psi national database?

Offline Gene_SC

  • Hero Member
  • *****
  • Posts: 11378
    • http://www.airguntoys.com
Re: 3000 vs 4500 tanks
« Reply #3 on: July 19, 2009, 12:35:36 AM »
You will have to cal around to find out.
THE ONES I SLEEP WITH: BSA Lightning XL, AA TX-200, AA ProSport, BSA Ultra, HW-97K, Crosman NPSS .177, FX Cyclone, HW-30 Nicle Plated, AA-S200, Crosman Marauder, CZ-634, R-9 DG, Webley/Scott UK Tomahawk, Benji Kantana, Benji Marauder, Benji Discovery.....
....

Gene\'s Tunz n Toyz
Springer Tunin

Offline kp4att

  • Hero Member
  • *****
  • Posts: 990
    • http://
Re: 3000 vs 4500 tanks
« Reply #4 on: July 19, 2009, 02:16:57 AM »
JASON IF YOU CAN BUY THE 4500 PSI TANK... GO FOR IT.

 YOU WILL GET MORE FILLS FOR A 3000 PSI PCP WITHOUT TO RETURN TO THE SCUBA SHOP SO SOON.
-------------------------------------------------------------
GERALD (KP4-ATT): PUERTO RICO ISLAND!!!
-------------------------------------------------------------

(Feb 3, 2010)
SUMATRA 500cc .22 - mira: Centerpoint 6-24 x 50 mm

MARAUDER .177 - mira: Leapers 8-32 x 56 mm (30mm)

RWS 48 .177 -     mira: Leapers 4-16 x 50 mm

RWS 350 .22  -  mira Centerpoint 3-9 x 50 mm

GAMO WHISPER VH .177 - mira BSA Panther 2.5-10 x 44 mm

953 .177 (INDOOR) - mira Simmons 3-9 x 32 mm

Offline DanoInTx

  • Hero Member
  • *****
  • Posts: 3010
    • http://airgunartisans.com
Re: 3000 vs 4500 tanks
« Reply #5 on: July 19, 2009, 04:15:17 AM »
As Gene mentioned the biggest issue with the higher pressure tanks is getting them filled.  Also remember that just because a paintball shop will fill a small paintball tank to 4500 psi doesn't mean they will fill a large SCBA tank to that pressure, and most wont.  I went through this same issue a few months back when I went from my pump to buying a tank and after calling all over the place I could only find SCUBA shops that would fill big tanks to 3300psi and paintball shops that would fill small tanks to 4500psi.  As it turned out I found an awesome SCUBA shop here in Fort Worth that set me up with a standard 3000 psi tank that they will fill to 3300 psi, which gives me a bunch of fills on my S200 that likes a 2700 psi fill and has a small air tube.  If I was only shooting a Discovery or something that takes a 2000psi fill then I would get boatloads of fills, so it really depends on what guns you plan on filling.  Hope this helps,
Dan

Current shooters: Beeman HW97K .177 with Hawke Eclipse 4x16x50SFAO and Steve C. stock, Beeman R9 .177 with Hawke Airmax 4-12x40AO and Gene\'s Midas touch, Air Arms S200 with Bushnell Banner 6x24x40AO Rowan brass bling and Steve C. custom stock, BAM B25, BAM B40 .177 with BSA 3x12x44AO, Benjamin Marauder .22, Benjamin 397 pumper.

\"repeat this mantra:
Air gunzzzzzz, air gunzzzzzz, air gunzzzzzzz!!!  ...You will feel better\" T.E.C.2008