« previous next »
Pages: [1]   Go Down

Author Topic: ok guys i know what ill do  (Read 3450 times)

Offline jonny1o1

  • GTA Donations
  • ******
  • Posts: 45
    • http://
ok guys i know what ill do
« on: February 13, 2007, 12:02:38 PM »
drill out the port to .150 (what is this in a fraction?)
new seals
align the barrel and ports
polish everything
new port between the tube and breech

this will add how much? 150 -200 fps?
Logged

Offline DanoInTx

  • Hero Member
  • *****
  • Posts: 3010
    • http://airgunartisans.com
Re: ok guys i know what ill do
« Reply #1 on: February 13, 2007, 12:31:21 PM »
"drill out the port to .150 (what is this in a fraction?) "

it's 150/1000ths

 :D

Dan
Logged
Dan

Current shooters: Beeman HW97K .177 with Hawke Eclipse 4x16x50SFAO and Steve C. stock, Beeman R9 .177 with Hawke Airmax 4-12x40AO and Gene\'s Midas touch, Air Arms S200 with Bushnell Banner 6x24x40AO Rowan brass bling and Steve C. custom stock, BAM B25, BAM B40 .177 with BSA 3x12x44AO, Benjamin Marauder .22, Benjamin 397 pumper.

\"repeat this mantra:
Air gunzzzzzz, air gunzzzzzz, air gunzzzzzzz!!!  ...You will feel better\" T.E.C.2008

Offline jonny1o1

  • GTA Donations
  • ******
  • Posts: 45
    • http://
Re: ok guys i know what ill do
« Reply #2 on: February 14, 2007, 07:46:19 AM »
so is that kinda 3/32 ?
Logged

Offline DanoInTx

  • Hero Member
  • *****
  • Posts: 3010
    • http://airgunartisans.com
Re: ok guys i know what ill do
« Reply #3 on: February 14, 2007, 09:58:42 AM »
huhm, more like 15/100ths

Dan
Logged
Dan

Current shooters: Beeman HW97K .177 with Hawke Eclipse 4x16x50SFAO and Steve C. stock, Beeman R9 .177 with Hawke Airmax 4-12x40AO and Gene\'s Midas touch, Air Arms S200 with Bushnell Banner 6x24x40AO Rowan brass bling and Steve C. custom stock, BAM B25, BAM B40 .177 with BSA 3x12x44AO, Benjamin Marauder .22, Benjamin 397 pumper.

\"repeat this mantra:
Air gunzzzzzz, air gunzzzzzz, air gunzzzzzzz!!!  ...You will feel better\" T.E.C.2008

  • Guest
Re: ok guys i know what ill do
« Reply #4 on: February 14, 2007, 11:55:29 AM »
150 thousands of an inch would be a number drill and the closest to it is a #25 drill which is .149 thousands of an inch.

3/32 is .093 thousands of an inch which is way too small.

Sounds like you better be careful when doing these modifications to your rifle, one slip and you might destroy the rifle barrel or the bolt. Some of these modifications are not for an amateur gunsmith.
Logged

Offline DanoInTx

  • Hero Member
  • *****
  • Posts: 3010
    • http://airgunartisans.com
Re: ok guys i know what ill do
« Reply #5 on: February 14, 2007, 12:44:24 PM »
I apologize Jonny, I'll quit playing around....as Rich said, it is NOT kinda like 3/32nds...it's closer to a #25 which is somewhere between 3/16" and 1/8" but not "kinda like" either.  If you don't totally understand what you're doing, you might be better off sending it to a knowledgeable airgunsmith.  Some of these mods done improperly can definately ruin your rifle, and possibly blow up in your face.  Be careful, and be safe!  If in doubt, ask, and if still in doubt, find someone to do the work for you.

Dan
Logged
Dan

Current shooters: Beeman HW97K .177 with Hawke Eclipse 4x16x50SFAO and Steve C. stock, Beeman R9 .177 with Hawke Airmax 4-12x40AO and Gene\'s Midas touch, Air Arms S200 with Bushnell Banner 6x24x40AO Rowan brass bling and Steve C. custom stock, BAM B25, BAM B40 .177 with BSA 3x12x44AO, Benjamin Marauder .22, Benjamin 397 pumper.

\"repeat this mantra:
Air gunzzzzzz, air gunzzzzzz, air gunzzzzzzz!!!  ...You will feel better\" T.E.C.2008

Offline jonny1o1

  • GTA Donations
  • ******
  • Posts: 45
    • http://
Re: ok guys i know what ill do
« Reply #6 on: February 16, 2007, 09:47:19 AM »
what about 3/16?  anways it wasnt answered with these mods how many fps would /could it be
Logged

Offline crgintx

  • GTA Donations
  • ******
  • Posts: 29
    • http://
Re: ok guys i know what ill do
« Reply #7 on: February 17, 2007, 01:58:36 PM »
At the risk of sounding smart***, your FPS will vary according to temperature, pellet, and pellets weight.  Since you gave us very little input data such as what did it shoot when it was stock with a particular pellet, how can anyone give you an exact figure as to what your modifications will yeild in terms of increase if any?  

BTW every computer operating system I've see has a calculator function that will tell you that 3/16 = .1875 ?  Some folks here offered you sound advice but you don't seem to understand it.
Logged

Offline jonny1o1

  • GTA Donations
  • ******
  • Posts: 45
    • http://
Re: ok guys i know what ill do
« Reply #8 on: February 21, 2007, 08:19:37 AM »
ok , umm... room temp with a crosman 14.3 cph or wad.... the reason im having trouble is that im in canada and my drill bits are like 1/4,3/16 and such so im trying to figuee out what would it be for my bits
Logged
Pages: [1]   Go Up
« previous next »