« previous next »
Pages: [1]   Go Down

Author Topic: FYI....B-28-B-25 barrel swap  (Read 1252 times)

Offline mikeiniowa

  • Hero Member
  • *****
  • Posts: 1110
    • http://airgunartisans.com/flyingdragon
FYI....B-28-B-25 barrel swap
« on: August 03, 2009, 02:16:50 PM »
The barrels for the B-28 and B-25 will swap between the rifles but the cocking linkage has to stay with the same action as the 28 link is much longer than the 25's. If you want fiber optic sights on the 28 then this is an option. The 25 barrel is about an inch shorter than the 28 barrel....
Logged

Offline Gene_SC

  • Hero Member
  • *****
  • Posts: 11378
    • http://www.airguntoys.com
Re: FYI....B-28-B-25 barrel swap
« Reply #1 on: August 03, 2009, 03:11:18 PM »
Is there a pin in the breech block Mike, that holds the barrel in place?
Logged
THE ONES I SLEEP WITH: BSA Lightning XL, AA TX-200, AA ProSport, BSA Ultra, HW-97K, Crosman NPSS .177, FX Cyclone, HW-30 Nicle Plated, AA-S200, Crosman Marauder, CZ-634, R-9 DG, Webley/Scott UK Tomahawk, Benji Kantana, Benji Marauder, Benji Discovery.....
....

Gene\'s Tunz n Toyz
Springer Tunin

Offline mikeiniowa

  • Hero Member
  • *****
  • Posts: 1110
    • http://airgunartisans.com/flyingdragon
Re: FYI....B-28-B-25 barrel swap
« Reply #2 on: August 03, 2009, 03:14:12 PM »
There is a 4mm pin through the breech block that hold the barrel in the block, the breech block is the same with both rifles so no need to pull the barrel just remove the c-clip holding the cocking arm link to the block and tap the pin for the pivot out and swap...Mike
Logged
Pages: [1]   Go Up
« previous next »