I DID IT!!!!!!!! :)

[jake]

looks great so far!

[geewhiz380]

timmy could do anything he puts his hands on .very professional in about all of the rifles he touches, he surley is very gifted and very helpful cause he is blessed by God...it true...jorge lopez

[Als69GT]

Timmy


If those are electrical lugs they are most likely made of aluminum. So the screw will be soft, they are usually good for a use or two and then they tend to start stripping the screw slot. If you have an industrial hardware store near by you can get a steel allen head set screw to go in that.

Looks good though, I'm not gutsy enough to do that to my Evanix stock but it looks good.

I don't know if you have seen this site or their catalog but it'll make you cross eyed after you head stops spinning.
http://woodworker.com/

Check out their dyes and stains

Al

[Timmyj1959@yahoo.com]

Thanks Al,,,, yes I know after talking with others the screws may not hold up to many adjustments. However,,, most Folks will get the comb where they like it most likely never change it. But,,,,,,, I have some Folks as well as myself working on a much better more durable design for the lugs that is simple yet exremly durable. Not only that my new design will make alignment issues a thing of the past!!It really only takes moderate preasure on the grub screws to hold the comb in place as no real preasure is aplied to it. All rough sanded & all I put my Marauder back together today & made several adjustments,,, so far so good.You do have a valid point though,, Im gonna make my new adjusters "Bullet Proof"!! Im not even gonna look at your link Buddy,,,,,, Im SOOOOOOO HAPPY with my new drill press Im going to get her reved up tommorow!! Ok I lied,,,,,,,,,,,,,,,,,,,,,,, Im gonna take a quick peek at it!!LOL!! Tim.

[Jaymo]

Timmy, dude, that looks awesome. I'd like to do something like that to my B40.

[Schmidty25]

Wow!  you have some cahones cutting into a $500 gun's stock!   That STAIN is Amazing!!! what color spec is that?  and if you don't mind me asking what finish do you use on your guns.  I've heard some people use Birchwoodcasey tru oil. products.  I am new to refinishing Gun Stocks and could use some Help!   I want to RE=finish my Refurb Ruger Air Hawk.  although it wouldn't hold a candle to yours...

thanx

http://www.birchwoodcasey.com/sport/wood_index.asp?categoryID=5&subcat=11

[Schmidty25]

Timmy I was reading into your old threads.  Do you use Pure tung Oil or Polymerized tung?   And if you don't mind sharing any other tips to using the Tung oil.

Thanx, fellow GTA member

[TCups]

Outstanding, Timbo.
I think you have the makings of a very successful custom stock maker.
I have a project in mind for you . . .

[brengraver]

The TrueOil works fine, but don't put it on like varnish.  
I usually use a filler stain first.  Put it on wet, and rub it off CROSS GRAIN before it drys completely.  Rub with a course cloth or you'll wipe the filler out of the grain.  Let it dry overnight and sand with good sanding products, not steel wool etc.  That will dig the filler out also.  Don't sand throuhg the stain, but work finer and finer (320-400) till it is flat and smooth.  
The TrueOil is put on in several coats.  I usually start a coat that will wet toe wood well but not run.  When it is thoroughly dry (next day) add another, not as thick.  When it is dry, use 0000 steel wool and work all the way down to a uniform sheen.  When you first start with the wool, youll see a dull flat, but as you continue, you'll see the satin finish.  
Now wipe ethe stock clean.  Put a drop of oil on your finger tims and spread it as far as it will go, then get another drop etc., etc.  What you're after here is to build a very thin coat.  Let it dry, and do it again.  After a couple of coats like this, lightly steel wool to the sheen again.  This now is like the shampoo bottle  "rinse, lather, repeat"  until you build up what you want.  Thin coats are the key.
This is a durable finish, and it is repairable.  Good luck, and rubbing.   Bob

PS  The old English boiled linseed oil thchnique was (after preping)  once a day for a week, once a week for a month, once a month for a year, and once a year for the rest of your life!  I'll take the Birchwood....

[Rontier]

every time I look at it (your goood workk) I thank abuot my quest & how good it would look in Timbo & co.

[shadow]

I had no doubt that you could do it bro and the special lube does help with the jitters lol. Ed