help finding a stock maker?

[shawn67]

Well Cancel that guys now I need a good gunsmith to do the inletting, Richards Microfit sold me a stock with a half inch barrel channel bot that's all no inletting, for all you QB rifle owners Richards Microfit does do stocks for them, it says on there add that they don't do air rifles but the gal that took my order today said they do stocks for QB air rifles and only QBs at this time, anyone know of a good inletter? Help please!

[KK0605]

Because Industry Brand and SAG and TF are all the same company, isn't there a QB that has the same dimensions as the TF89? If there is, you could just buy one for that QB model.....

[shawn67]

That's a good question that I need a fast answer on thanks bro

[KK0605]

I posted a new thread on it.... good luck!

[shawn67]

Well the guy at Tech force says no it won't work, I may be up the proverbial creek without a paddle, I hope I can find some one who can do it

[KK0605]

Well, from what I can see, the QB23 has a different powerplant because of the velocity difference, but the only other difference is that it has a blockier look and the details are different.... the barrel and the rest should be the same size.

AR1000
http://www.airrifle-china.com/newEbiz1/EbizPortalFG/portal/html/ProductInfoExhibit.html?ProductInfoExhibit_ProductID=c373e91fadd4df108f6fefcd523e7434&ProductInfoExhibit_isRefreshParent=false

QB23
http://www.airrifle-china.com/newEbiz1/EbizPortalFG/portal/html/ProductInfoExhibit.html?ProductInfoExhibit_ProductID=c373e9208390c6688f6a648d7c6ff9df&ProductInfoExhibit_isRefreshParent=false

[shawn67]

I called back Richard Microfit and the QBs they do are the 79s, I thought they did all QBs but the gal was misinformed, I even called Tech Force and offered to pay them to do it since they have the jigs already, and they said NO, so I'm looking as hard as I can to find a skilled individual to do the inletting, I'm asking everyone I can think of, I'd hate to have this beautiful stock that I can't get to work

[Timmyj1959@yahoo.com]

I just got off the phone with the manufacturing rep.finalizing all the features for my new wood duplicator.We are in the final stages of getting my new machine built/ordered. Due to the kindness of another GTA Family member it looks like I will have my new machine in about a week or two.Soon I will be able to duplicate my own custom stocks or duplicate factory inletting to within .005" in a matter of minutes!!Looks like I will be wanting to borrow LOTS of stocks from Me GTA Family soon!! LOL!! Tim.

[shawn67]

Well old buddy I happen to have a stock from a TF89 that cracked on me right where it bolt to the action, its not bad at all and it would cover that model for you. And I had to cancel the Richards stock because the diminsions wouldn't work, the foreamn was to narrow to allow the inletting of the action, so I,d much rather have you make me one anyways, so everything works out for the best in the long run anyway! Send me your address pm and I'll ship that stock to you bro, your more than welcome to keep it. Thanks Timmy!

[thebookdoc]

Tim,

is that duplicate key stock features and customize? If so i have at least one and maybe two or three projects for you.

let me know:

thebookdoc@aol.com