« previous next »
Pages: [1]   Go Down

Author Topic: Just got my Accu-Shot rings from Scragglepoint...  (Read 2400 times)

Offline vinceb

  • Hero Member
  • *****
  • Posts: 1943
    • http://
Just got my Accu-Shot rings from Scragglepoint...
« on: June 29, 2006, 05:02:37 AM »
Two-piece HD rings, 4 bolts for each scope clamp, and 2 bolts on each ring for the rail clamp. Also, one has an adjustable recoil pin (you can adjust the depth or retract it completely without removing it).

The kit came with 3 allen wrenches, an extra recoil pin, and an extra bolt for the rail clamp and for the scope clamp.

Not bad for $7.00
Logged

  • Guest
Yep.....they are nice
« Reply #1 on: June 29, 2006, 06:18:43 AM »
I have the same ones on my .22 caliber B19 carbine.
Locked that rear ring in place by screwing the locking screw down into the milled recess in the tube....it has not moved yet. And they are holding a fairly heavy BSA 3-12 scope too. Not a budge.
I was considering trying the one-piece mounts on it, but it doesn't seem to need that.
Accushot mounts from Scragglepoint (without some $9 UPS charge!).....what a deal!  :)
Jack
Logged

Offline raterminator

  • Sr. Member
  • ****
  • Posts: 309
    • http://
RE: Yep.....they are nice
« Reply #2 on: June 29, 2006, 09:35:19 AM »
Jack, I like the look of your B19. How about the accuracy?
Logged

  • Guest
Re: Just got my Accu-Shot rings from Scragglepoint...
« Reply #3 on: June 29, 2006, 10:40:46 AM »
I bought several sets from Scragglepoint when I had to mounts scopes onto youth guns for our airgun club. You can't beat a deal like that. All told, I spent as much as 1 set of beeman mounts for several sets of Accushot mounts.
Logged

Offline MULLSKINNER

  • Full Member
  • ***
  • Posts: 137
    • http://
Re: Just got my Accu-Shot rings from Scragglepoint...
« Reply #4 on: June 29, 2006, 11:00:10 AM »
IT'S ALL I USE ON MUH B 20'S UNLESS I CAN'T GET ZERO THEN I GO TO A ADJUSTABLE MOUNT ...FOR THE MONEY BY FAR AND AWAY THE BEST MOUNT THERE IS ..........
Logged
.......MULLSKINNER ............

Offline Gene_SC

  • Hero Member
  • *****
  • Posts: 11378
    • http://www.airguntoys.com
RE: Just got my Accu-Shot rings from Scragglepoint...
« Reply #5 on: June 29, 2006, 10:47:18 PM »
Accushot mounts and rings are dang reasonable. Sure beats those expensive one.
Logged
THE ONES I SLEEP WITH: BSA Lightning XL, AA TX-200, AA ProSport, BSA Ultra, HW-97K, Crosman NPSS .177, FX Cyclone, HW-30 Nicle Plated, AA-S200, Crosman Marauder, CZ-634, R-9 DG, Webley/Scott UK Tomahawk, Benji Kantana, Benji Marauder, Benji Discovery.....
....

Gene\'s Tunz n Toyz
Springer Tunin

  • Guest
RE: accuracy
« Reply #6 on: June 30, 2006, 12:30:13 AM »
Quote
raterminator - Jack, I like the look of your B19. How about the accuracy?

I haven't shot it out in the open yet. But it outshoots me. At 10 yards off a rest I make one ragged hole groups with it though. I have been working on consistently hitting inside a dime at 10 yards offhand. I'm not much of a springer shooter, so I'm relearning the techniques. Barrel was cut back to 11" and with all the other mods it pops a 14.6grain .22  pellet out at around 740fps. I can't claim any credit, I'm the third person to own this one I think. A guy named George (coldbeerchief) did all of the internal mods and shortened the barrel on a lathe. A smooth little B19.
Jack
Logged
Pages: [1]   Go Up
« previous next »