Please Help!!!!

[LongIslandArcher]

Ezman, the first picture - the spring is in the wrong place.  The second picture has the spring in the right place.

[ezman604]

Sorry, sure don't want to pass on bad info but that's how my Benji was set up.

[Uncle J]

Buckys,

Loosen the 10 MM trigger assembly bolt and wiggle the tab from side to side and make sure the trigger assembly is sitting flat on the tab, this was my problem when I could not cock mine. I would not try to cock it without the stock back in place.

Jeff

[Buckys]

tjk - 3/24/2010  10:35 AM

Check your linkage roller bearing and make sure it's on the pin of the secondary linkage arm. Your rifle butilizes what is called an "articulated" cocking arm,...that is two levers working in unison. Without the roller bearing, the foot at the bottum of the cocking arm,... Where it pushes the piston back,...may in fact be sliding past the pistons cockinf contact area of the slot. Not very likely, but like I said before,.. sometimes weird things just happen!!! LOL's. Whatever happens in the next few hours, just relax and don't get excited!!! At least not too much!! tjk

Tjk...I think you may be on to something...could you direct me to a pic of exactly what you are talking about?!?  Also, looking at these pics,(http://www.gatewaytoairguns.com/airguns/forums/thread-view.asp?tid=26585&mid=210026#M210026),it seems to me that the cocking foot needs to somehow be put in that gap between the two silver areas on the piston?....What do you think?

[ezman604]

Brandon, the cocking foot does not go in the first opening. That one is for the trigger sear to catch in when cocked. The second opening is where the cocking shoe engages.

[longislandhunter]

there ya go.....  

Jeff

[CharlieDaTuna]

Regarding the beartrap link return spring. It does not matter if the spring is in the inside or the outside. I will not have any adverse impact on the gun and a good many of the Theoben/Gamo trigger do have them on the outside.

[Uncle J]

Buckys,

Did you ever get your problem taken care of.

Jeff