Author Topic: Disco Rubber Butstock  (Read 5771 times)

Offline CitySniper

  • Full Member
  • ***
  • Posts: 163
Disco Rubber Butstock
« on: April 04, 2010, 04:06:04 AM »
where do i buy one?
.177 Gamo CFX
.22 Benjamin Discovery
.22 Benjamin Marauder

Offline Big_Bill

  • Hero Member
  • *****
  • Posts: 5615
    • http://
RE: Disco Rubber Butstock
« Reply #1 on: April 04, 2010, 04:13:42 AM »


They may not have the best prices, but they do have the best quality !



www.brownells.com



Bill

Life Member of The United States of America
Life Member of the National Rifle Association
Member Air Guns Addicted Anonymous
SHOOT SAFE ! - SHOOT WELL ! - SHOOT OFTEN !
Always Use A Spring Compressor ! and Buy the GREAT GRT-III & CBR Triggers, cause they are GRRRREAT !

Offline CitySniper

  • Full Member
  • ***
  • Posts: 163
RE: Disco Rubber Butstock
« Reply #2 on: April 04, 2010, 04:21:43 AM »
thanks Bill....is this the one?

http://www.brownells.com/.aspx/pid=6379/Product/RECOIL_PAD__RUBBER__DOUBLE_VENT__GUNSMITHING_REQUIRED


what is needed to install? lol I was hoping to just screw it on
.177 Gamo CFX
.22 Benjamin Discovery
.22 Benjamin Marauder

Offline Truman

  • Sr. Member
  • ****
  • Posts: 485
    • http://
Re: Disco Rubber Butstock
« Reply #3 on: April 04, 2010, 06:42:32 AM »
Darius, I've just done the same thing! I asked this question a few weeks ago and got some excellent advice from the guys! Here's the link.

http://www.gatewaytoairguns.com/airguns/forums/thread-view.asp?tid=26259&posts=15#M208250

And here's the finished results.

http://www.gatewaytoairguns.com/airguns/forums/thread-view.asp?tid=26932&posts=4#M212636

Hope that helps a bit!
Try to get the closest fitting one you can! I used an angle grinder to do the shaping but I think a belt sander would give better results!
Andy
cuiusvis hominis est errare, nullius nisi insipientis in errore perseverare.

Offline Big_Bill

  • Hero Member
  • *****
  • Posts: 5615
    • http://
RE: Disco Rubber Butstock
« Reply #4 on: April 04, 2010, 06:59:24 AM »


It would be up to you Darius,



But that is a straightshotgun recoil pad, you might be interested in a curved rifle recoil pad !



$48.00 is a little steep !



I believe that Natches also sells recoil pads like Pachmayr for around $25+



I know that the Air Gun Companies don't spend that much for them, heck, you can buy a whole stock, with the pad for less than that.



Bill

Life Member of The United States of America
Life Member of the National Rifle Association
Member Air Guns Addicted Anonymous
SHOOT SAFE ! - SHOOT WELL ! - SHOOT OFTEN !
Always Use A Spring Compressor ! and Buy the GREAT GRT-III & CBR Triggers, cause they are GRRRREAT !

Offline CitySniper

  • Full Member
  • ***
  • Posts: 163
RE: Disco Rubber Butstock
« Reply #5 on: April 04, 2010, 07:34:11 AM »
thanks Bill, ....Andy that looks pretty good, I bet that gun shoulders nice.
.177 Gamo CFX
.22 Benjamin Discovery
.22 Benjamin Marauder

Offline Truman

  • Sr. Member
  • ****
  • Posts: 485
    • http://
RE: Disco Rubber Butstock
« Reply #6 on: April 04, 2010, 11:15:03 AM »
Yes, it feels a lot more comfy to shoulder! Before it always felt like it wanted to flop forward, but now it just sits where I put it! Also with the added weight up front, it helps slow the shakes down to a controllable level! LOL!! It was well worth the effort because it has changed the whole feel of the disco!
cuiusvis hominis est errare, nullius nisi insipientis in errore perseverare.