Author Topic: 1/4" gauge Window Hunter Extreme  (Read 1987 times)

Offline PBJ

  • Sr. Member
  • ****
  • Posts: 344
    • http://
1/4" gauge Window Hunter Extreme
« on: July 24, 2007, 10:47:59 AM »
Have decided to give up all forms of hunting dove with guns of any type as I have found a new system of getting all the dove I want with my new 1/4" gauge Window Extreme Hunter!! As you can see from the pictures of this dreaded device, this is not the first dove to fall to the accuracy of this fine weapon. I might add that the groups are a bit large at 24"-30" for three "shots" but it does not seem to lower the number of birds I bag using this method of hunting. By the way, I do have to run down the occasional "wounded critter" and use my backup weapon - my bare hand. Seriously, even with the light and the fan on, all kinds of birds smack into this window. Dove are the worst, but a few quail have come in at full speed and one day an owl almost took out the whole opening. Now if I can just get the jackrabbits and coyotes to run into my other new toy, the Hyper-Velocity 8' Sliding See-Thru Door Hunter Maximum, I will have a full quiver of alternative and fully legal to carry concealed hunting weapons. I have started a new effort with the NRA to protect our rights to own See-Thru windows and doors. Please send me $100 each to help keep this issue before our legislators who are voting on the "See-Thru Window & Door Ban" next week!
Bob Jarrard (PBJ)
2 .177 Gamo 440\'s, .177 Gamo CFX, 2 .22 Gamo CFX\'s .177 AR2078A .177 Mendoza/Crossman. CDT tune/trigger on the 440\'s/.177 CFX & CDT trigger on one .22 CFX.

Offline DAMAGE

  • Full Member
  • ***
  • Posts: 245
    • http://
RE: 1/4" gauge Window Hunter Extreme
« Reply #1 on: July 24, 2007, 11:22:48 AM »
LMAO thats funny stuff man I needed a laugh this morning thanks for that just what the doctor orderd.
Sean
           M.C.A.S.A
Mid-Central Airgun Shooters Assn
 MCASA-Small Game Hunters Club
           Wanganui
          New Zealand

http://www.nzairgunners.com/nzairgunforum/index.php

Offline Gene_SC

  • Hero Member
  • *****
  • Posts: 11378
    • http://www.airguntoys.com
Re: 1/4" gauge Window Hunter Extreme
« Reply #2 on: July 24, 2007, 12:00:07 PM »
LOL Bob, great stuff there buddy.:)

Gene
THE ONES I SLEEP WITH: BSA Lightning XL, AA TX-200, AA ProSport, BSA Ultra, HW-97K, Crosman NPSS .177, FX Cyclone, HW-30 Nicle Plated, AA-S200, Crosman Marauder, CZ-634, R-9 DG, Webley/Scott UK Tomahawk, Benji Kantana, Benji Marauder, Benji Discovery.....
....

Gene\'s Tunz n Toyz
Springer Tunin

Offline shadow

  • Hero Member
  • *****
  • Posts: 11453
    • http://airguncamo@yahoo.com
Re: 1/4" gauge Window Hunter Extreme
« Reply #3 on: July 24, 2007, 12:07:12 PM »
LOL bob that's good. I once had 71 Datsun Hunter special, the window on it took two grouse and a turkey in one year. I had to retire it, the turkey was to much fore it hehe. Great pic's also. Ed
I airgun hunt therefore I am... };)  {SHADOWS Tunes & Camo}  airguncamo@yahoo.com

Offline Big_Bill

  • Hero Member
  • *****
  • Posts: 5615
    • http://
RE: 1/4" gauge Window Hunter Extreme
« Reply #4 on: July 24, 2007, 01:03:58 PM »


Hay Bob,



Real Good ! The way I shoot, I should look into something like that....LOL



Leave it to you to find an easier way, when you get a ten point buck, let me know !!!!!

Life Member of The United States of America
Life Member of the National Rifle Association
Member Air Guns Addicted Anonymous
SHOOT SAFE ! - SHOOT WELL ! - SHOOT OFTEN !
Always Use A Spring Compressor ! and Buy the GREAT GRT-III & CBR Triggers, cause they are GRRRREAT !

Offline PBJ

  • Sr. Member
  • ****
  • Posts: 344
    • http://
Nissan Hunter
« Reply #5 on: July 24, 2007, 04:37:29 PM »
Ed, I have been driving rice burners for years, have a 2000 model now. I use the right front tire for rabbits and the fender well for quail. Will start looking for turkeys now that I now that the truck will not over penetrate on a quartering hit.
Bob Jarrard (PBJ)
2 .177 Gamo 440\'s, .177 Gamo CFX, 2 .22 Gamo CFX\'s .177 AR2078A .177 Mendoza/Crossman. CDT tune/trigger on the 440\'s/.177 CFX & CDT trigger on one .22 CFX.

Offline PBJ

  • Sr. Member
  • ****
  • Posts: 344
    • http://
Re: 1/4" gauge Window Hunter Extreme
« Reply #6 on: July 24, 2007, 04:39:39 PM »
Sean, read your posts here on the GTA and on the New Zealand site. Will get down your way someday and will be sure to get together and shoot a few pellets at the dangerous game in your neck of the woods.
Bob Jarrard (PBJ)
2 .177 Gamo 440\'s, .177 Gamo CFX, 2 .22 Gamo CFX\'s .177 AR2078A .177 Mendoza/Crossman. CDT tune/trigger on the 440\'s/.177 CFX & CDT trigger on one .22 CFX.

Offline Randino

  • Sr. Member
  • ****
  • Posts: 268
    • http://
Re: 1/4" gauge Window Hunter Extreme
« Reply #7 on: July 24, 2007, 05:44:39 PM »
A see through window ban???

Explain what exactly they are trying to ban? Windows?
Current weapon of choice: Betsy, my Turbo Tuned Gamo Hunter 220.177 with the GRT III Trigger.

  • Guest
RE: 1/4" gauge Window Hunter Extreme
« Reply #8 on: July 25, 2007, 02:25:31 PM »
Hey aren't they illegal in most states??? Or at least a licence is needed to own/operate the W.H.E.??? LOL
Try these
http://www.northwestnatureshop.com/department/Anti-Collision_Decals/Window_Alert_Anti-collision_Decals/319.html

Offline PBJ

  • Sr. Member
  • ****
  • Posts: 344
    • http://
Window graphics
« Reply #9 on: July 25, 2007, 05:10:05 PM »
Will have to give them a try, I was just not washing my windows but the wife got a bit hostile.
Bob Jarrard (PBJ)
2 .177 Gamo 440\'s, .177 Gamo CFX, 2 .22 Gamo CFX\'s .177 AR2078A .177 Mendoza/Crossman. CDT tune/trigger on the 440\'s/.177 CFX & CDT trigger on one .22 CFX.

Offline PBJ

  • Sr. Member
  • ****
  • Posts: 344
    • http://
Re: 1/4" gauge Window Hunter Extreme
« Reply #10 on: July 25, 2007, 05:11:51 PM »
Right now the proposed ban is only in Caliornia. We had a good run while it lasted. It may be part of a plot by SC Edison to sell more electricity!
Bob Jarrard (PBJ)
2 .177 Gamo 440\'s, .177 Gamo CFX, 2 .22 Gamo CFX\'s .177 AR2078A .177 Mendoza/Crossman. CDT tune/trigger on the 440\'s/.177 CFX & CDT trigger on one .22 CFX.

Offline Randino

  • Sr. Member
  • ****
  • Posts: 268
    • http://
Re: 1/4" gauge Window Hunter Extreme
« Reply #11 on: July 25, 2007, 06:29:15 PM »
Must be those dang liberals, first our windows, next our cronys!
Current weapon of choice: Betsy, my Turbo Tuned Gamo Hunter 220.177 with the GRT III Trigger.