Author Topic: XS-B3-1, KL-3B  (Read 2513 times)

Offline fnash

  • Sr. Member
  • ****
  • Posts: 430
    • http://
XS-B3-1, KL-3B
« on: January 12, 2008, 03:02:43 PM »
Thinking of trying to adapt the wood stock of the KL-3B Fast Deer to the XS-B3-1, replace the steel. Has anyone ever tried this? Any info would be welcome... Thanks...FN
FN

Offline shadow

  • Hero Member
  • *****
  • Posts: 11453
    • http://airguncamo@yahoo.com
RE: XS-B3-1, KL-3B
« Reply #1 on: January 13, 2008, 01:17:41 AM »
Never tried it but would be a good project. The location of the forestock holes on the Fast Deer stock and the one's on the XS would be my concern. Keep us posted on what you come up with.;0 Ed
I airgun hunt therefore I am... };)  {SHADOWS Tunes & Camo}  airguncamo@yahoo.com

Offline Splash

  • Hero Member
  • *****
  • Posts: 2123
    • http://www.airgunspa.com
RE: XS-B3-1, KL-3B
« Reply #2 on: January 13, 2008, 01:33:39 AM »


I've never tried either, but it may be easier to start from scratch. If the mounting holes don't line up they can be filled and moved, easily if your going to paint it. If you were going to stain, then plug the holes with a hardwood dowel. I would check to be sure that the inletting will work for the action. If it won't start from scratch, you can put alot of work in it trying to modify it to fit, only to wind up with a stock that won't work on either. Sounds like it could be fun tho.



Mike

Mike
We can\'t control the wind, but we can adjust our sails.
http://www.airgunspa.com
http://www.airgunone.com
http://www.airguntricks.com

Offline howie1a

  • Hero Member
  • *****
  • Posts: 994
    • http://ihowie1a@yahoo.com
Re: XS-B3-1, KL-3B
« Reply #3 on: January 13, 2008, 10:47:02 AM »
I would put a set of sling eyes on the deer stock that would take care of the hole in the foward part of the stock so you wouldn't have to fill or plug it and it would look like you planed it that way. howie
Howie1a
CURRENT HERD ,, Baikal pistol M53 in 177 ,,crossman pistol 357 -177cal. ,,Bam 30 -22 cal,,  RWS 320 cal 177 custom walnut  stock,,QB2078 custom stock walnut cal177,,   QB2078 custom walnut stock  22 cal,,B7 custom stock cal 177 ,, B12 custom stock cal 177,,B16 from shadow 177 cal,,<< ALL THE REST OF MY  RIFLES FROM \"\"MIKE M. Flying Dragon Air Rifles \"\" Super nice.


Offline fnash

  • Sr. Member
  • ****
  • Posts: 430
    • http://
Re: XS-B3-1, KL-3B
« Reply #4 on: January 13, 2008, 12:01:12 PM »
I am getting so many ideas here I am just going to have to go ahead with this.... Thanks Guys.... FN
FN