Not sure if I can do this seeing as how these aren't airgun related... But the proceeds WILL go towards a new airgun!!!
Anyway. I have a brand new COMPLETE set of Convertibars for 00-07 Suzuki GSXR600/750 and 01-04 1000.
They replace the stock clip-ons and allow you to adjust your bars up to +4 inches rise and 4 inches closer for a shorter reach.
I've had these for a while but decided to turn my bike into another race bike instead of a commuter. SO, these really didn't work out for me.
This kit contains:
- New handle bars with adjustable clamps
-New +3 inch Clutch Cable
-New +5 inch Spiegler steel braided brake line
-New +2 inch Throttle Cables
-Printed instructions and instructions on CD
This kit has NEVER been installed and is still in the box. I've opened it to make sure everything was there. That's all. One Note! for 06-07 750/600 and 03-04 1000 you will need a fairing spacer kit if you want FULL rise from this kit. Otherwise you can install the kit without the spacers and have +2.5 inch rise.
This kit should also work with any bike that has 50mm forks. The only exception would be the clutch & throttle cables. The brake line should be usable with just about any bike seeing as how banjos & banjo bolts are pretty much all a standard size.
Anyhow...I'm askin $350
E-Mail for pix or a link to the manufacturers website.
