« previous next »
Pages: [1]   Go Down

Author Topic: GRT-III do on the drop test?  (Read 1368 times)

  • Guest
GRT-III do on the drop test?
« on: February 06, 2008, 06:14:21 PM »
How are the GRT-III as far as on the Drop/Bump test?
Is it so light it will go off?
I understand you should all ways use the safety.
It just something I do on all the Rekord triggers after adjusting them.
I've had them so light it has gone off on the bump test.

Is the an adjustment on the GTR-III?
Logged

Offline preez

  • Hero Member
  • *****
  • Posts: 605
    • http://
RE: GRT-III do on the drop test?
« Reply #1 on: February 06, 2008, 09:56:18 PM »
I have 2 of them. Did not fudge with Charlie's adjustments. Both bump tested safe.

Yes, there's adjustment, but most likely you will not need it.

Chris
Logged
Bam B-26 .22, Hammerli 850 .22 HPA, Marauder .22

LITTLE HUMILITY GOES A LONG WAY!!!!!!!!! - Joe Cuz

Offline Gene_SC

  • Hero Member
  • *****
  • Posts: 11378
    • http://www.airguntoys.com
Re: GRT-III do on the drop test?
« Reply #2 on: February 07, 2008, 12:46:42 AM »


Believe it or not but CDT assembles these triggers into his test unit and each and everyone is adjusted to perfection and tested. I know because I have helped him on many occasions setting them up. I install the springs, and screws, and hand them over to CDT sitting next to me and he installs them and tests them right there..:) I have seen a pile of 200 trigger sitting there waiting for assembly and testing.. Not only are there 28 steps in the CNC process to manufacture them and not to mention the anodizing process, but it takes hours to set these triggers up by hand and test after they have completed the machining process.. And I did not mention the time it takes to custom cut the springs to length and de burr the ends..:)





Just a bit of info..:)





Gene

Logged
THE ONES I SLEEP WITH: BSA Lightning XL, AA TX-200, AA ProSport, BSA Ultra, HW-97K, Crosman NPSS .177, FX Cyclone, HW-30 Nicle Plated, AA-S200, Crosman Marauder, CZ-634, R-9 DG, Webley/Scott UK Tomahawk, Benji Kantana, Benji Marauder, Benji Discovery.....
....

Gene\'s Tunz n Toyz
Springer Tunin

Offline Big_Bill

  • Hero Member
  • *****
  • Posts: 5615
    • http://
Re: GRT-III do on the drop test?
« Reply #3 on: February 07, 2008, 04:29:14 AM »


Darn Gene,



I thought that I was just lucky when my GRT-III worked so well. I didn't knowBob adjusted each trigger before shipping ! Bob and You are amazing, in this day when customer service are just words in most adds, you guys areThe Best!



Thanks for all the attention you put into my trigger ! Cause I LOVE it !!!!!



Bill

Logged
Life Member of The United States of America
Life Member of the National Rifle Association
Member Air Guns Addicted Anonymous
SHOOT SAFE ! - SHOOT WELL ! - SHOOT OFTEN !
Always Use A Spring Compressor ! and Buy the GREAT GRT-III & CBR Triggers, cause they are GRRRREAT !

Offline Gene_SC

  • Hero Member
  • *****
  • Posts: 11378
    • http://www.airguntoys.com
Re: GRT-III do on the drop test?
« Reply #4 on: February 07, 2008, 05:32:43 AM »
LOL Bill, Bob was doing all that long before I ever come along..:) I am just very lucky and fortunate to be able to work along side Bob...:)

Gene
Logged
THE ONES I SLEEP WITH: BSA Lightning XL, AA TX-200, AA ProSport, BSA Ultra, HW-97K, Crosman NPSS .177, FX Cyclone, HW-30 Nicle Plated, AA-S200, Crosman Marauder, CZ-634, R-9 DG, Webley/Scott UK Tomahawk, Benji Kantana, Benji Marauder, Benji Discovery.....
....

Gene\'s Tunz n Toyz
Springer Tunin
Pages: [1]   Go Up
« previous next »