« previous next »
Pages: [1]   Go Down

Author Topic: Gamo Shadow 1000..Wooden stock??  (Read 1929 times)

Offline cf42fwb

  • Full Member
  • ***
  • Posts: 179
    • http://
Gamo Shadow 1000..Wooden stock??
« on: February 11, 2008, 12:12:35 PM »
Can I replace the synthetic stock for for wood????If so, is it much of a project??
Logged
Powerline 1000 tuned,HW97K,Turbo tuned RWS 34 W/4-16 Swift,Bsa Lightning XL.177.

Offline cf42fwb

  • Full Member
  • ***
  • Posts: 179
    • http://
Re: Gamo Shadow 1000..Wooden stock??
« Reply #1 on: February 11, 2008, 12:28:03 PM »
Man,once again...posted in the wrong forum..SORRY,GUYS..
Logged
Powerline 1000 tuned,HW97K,Turbo tuned RWS 34 W/4-16 Swift,Bsa Lightning XL.177.

Offline preez

  • Hero Member
  • *****
  • Posts: 605
    • http://
RE: Gamo Shadow 1000..Wooden stock??
« Reply #2 on: February 11, 2008, 12:29:06 PM »
Gamo sells hunter 440 or 220 stocks. The 440 is $37. It takes 3 torx screws to replace it.
Logged
Bam B-26 .22, Hammerli 850 .22 HPA, Marauder .22

LITTLE HUMILITY GOES A LONG WAY!!!!!!!!! - Joe Cuz

Offline Gene_SC

  • Hero Member
  • *****
  • Posts: 11378
    • http://www.airguntoys.com
Re: Gamo Shadow 1000..Wooden stock??
« Reply #3 on: February 11, 2008, 12:34:10 PM »


LOL Chris, you are now initiated..:) We all have done it so do not worry. Give's us moderators something to do..:)



Gene

Logged
THE ONES I SLEEP WITH: BSA Lightning XL, AA TX-200, AA ProSport, BSA Ultra, HW-97K, Crosman NPSS .177, FX Cyclone, HW-30 Nicle Plated, AA-S200, Crosman Marauder, CZ-634, R-9 DG, Webley/Scott UK Tomahawk, Benji Kantana, Benji Marauder, Benji Discovery.....
....

Gene\'s Tunz n Toyz
Springer Tunin

Offline Gene_SC

  • Hero Member
  • *****
  • Posts: 11378
    • http://www.airguntoys.com
Re: Gamo Shadow 1000..Wooden stock??
« Reply #4 on: February 11, 2008, 12:37:13 PM »
The 440 stock comes with rubber butt plate and seems to be of a better quality finish. Also the roller inside the stock is a bit larger than the one that comes with the synthetic stock. Change the roller and your Shadow 1000 action will fit in the 440 like a glove..:)

Gene
Logged
THE ONES I SLEEP WITH: BSA Lightning XL, AA TX-200, AA ProSport, BSA Ultra, HW-97K, Crosman NPSS .177, FX Cyclone, HW-30 Nicle Plated, AA-S200, Crosman Marauder, CZ-634, R-9 DG, Webley/Scott UK Tomahawk, Benji Kantana, Benji Marauder, Benji Discovery.....
....

Gene\'s Tunz n Toyz
Springer Tunin

Offline leftcoast1

  • Hero Member
  • *****
  • Posts: 2246
    • http://
RE: Gamo Shadow 1000..Wooden stock??
« Reply #5 on: February 11, 2008, 01:10:24 PM »
You need a trigger guard about 6 bucks and you may need a air compression tube cap.Nope just checked tube caps are the same. Good luck.
Logged
Jason
A couple of Springers nothin to get excited about.

Offline vinceb

  • Hero Member
  • *****
  • Posts: 1943
    • http://
A 220 stock is a perfect fit....
« Reply #6 on: February 13, 2008, 12:24:43 PM »
...a 440 is not, at least if you plan to use open sights. The rear sight on the 440 is different, and the 440 stock has a smaller cutout in the front to clear the adjustment knob when cocking the gun. To use a 440 stock, you'll have to either lose the rear sight or enlarge the cutouts.

The trigger guards are interchangeable, whether they are plastic or metal.

As for the rollers, the Shadow I just had apart had the larger roller and the 440 had the smaller one.

BTW - you might not like the 220 stock. It's about 1" shorter than the Shadow stock, and it's rather plain looking...

FYI, I just had one of each apart and dropped the Shadow action into the 440 stock to see how this worked.
Logged
Pages: [1]   Go Up
« previous next »