« previous next »
Pages: [1]   Go Down

Author Topic: Thumb hole stock  (Read 3331 times)

Offline SGTMEATSAUCE

  • Jr. Member
  • **
  • Posts: 96
    • http://
Thumb hole stock
« on: February 23, 2008, 01:31:53 PM »
Anyone know if there is a stock, synthetic or wood in the THUMBHOLE version that would fit a Gamo Whisper?
Logged
08 GAMO WHISPER CDT trigger/Nerf football enhanced synthetic stock
Crosman 2100 Classic(circa 1990)
Crosman 760(circa 1980ish)
REPUBLIC OF NEW JERSEY

Offline kcurrie

  • Full Member
  • ***
  • Posts: 158
    • http://
RE: Thumb hole stock
« Reply #1 on: February 23, 2008, 03:15:01 PM »


Or a CFX.. that would be sweet :-)



Logged
Playing with:
Gamo .177 CFX/GRT-III / Delta
Baikal .22 MP-512M
Crosman 2240/ 2250 / 1377c / 1077 / 781
2 X .22 B3 / .22 QB362 / Daisy 22sg / No 100, Model 38
Beeman P17 / Beretta PX4 Storm .177 (and 9mm)
Ruger Airhawk .177 / XS-B3-1 (ak-47) .177
----------------------------------------------------

Offline Rixtrix

  • Hero Member
  • *****
  • Posts: 620
    • http://
Re: Thumb hole stock
« Reply #2 on: February 29, 2008, 05:39:58 PM »
Splash could probably make one. Send him a PM

RicG
Logged
Daisy Model 25 BB gun, 45 years young and still shooting-    BSA Ultra .177, RFM Muzzlebrake, Bushnell Elite 4200 6x24-40 AO Mildot scope,  SportsMatch high rings)-    Gamo Shadow 1000, GRT-lll trigger, AirGunToyz Muzzle Brake, Centerpoint 4-16x40 AO IR mildot,Accushot Med. One Piece Mount, JM Tarantula spring and seal, polished internals, sleeved guide and tophat,self-tuned with CDT advice, CPL, JSB Exact or Predator pellets

Offline Splash

  • Hero Member
  • *****
  • Posts: 2123
    • http://www.airgunspa.com
Re: Thumb hole stock
« Reply #3 on: March 01, 2008, 12:18:06 AM »


Thanks Ric and you are correct, I can. However it would be a few months before I could start on it. I've got 2 for myself to finish, then 4 more to do first.



Mike

Logged
Mike
We can\'t control the wind, but we can adjust our sails.
http://www.airgunspa.com
http://www.airgunone.com
http://www.airguntricks.com

Offline Phil_B

  • Sr. Member
  • ****
  • Posts: 463
    • http://
Re: Thumb hole stock
« Reply #4 on: March 01, 2008, 01:13:39 AM »
Were's the order form
Logged
850 .22 HPA
Marauder .22 w/Leapers 6-24X50
Gamo Viper .177 w/ CenterPoint 4-16x40
Diana 26 .177 w/3-9x40
Diana 36 .177 w/RWS 3-9x40
Diana 46 .177 w/ NCstar mark III 10-40x50
Diana 48 .22  w/ CenterPoint 4-16x40
Diana 350 mag .22 w/Leapers 6-24X50
Diana 350 Feuerkraft Pro Compact .177 w/Leapers6-24X50

Offline Splash

  • Hero Member
  • *****
  • Posts: 2123
    • http://www.airgunspa.com
Re: Thumb hole stock
« Reply #5 on: March 01, 2008, 01:21:15 AM »


Send me an email brown929669@bellsouth.net



Mike

Logged
Mike
We can\'t control the wind, but we can adjust our sails.
http://www.airgunspa.com
http://www.airgunone.com
http://www.airguntricks.com

Offline SGTMEATSAUCE

  • Jr. Member
  • **
  • Posts: 96
    • http://
Re: Thumb hole stock
« Reply #6 on: March 09, 2008, 01:21:09 PM »
Take a look at this new Whisper!     http://www.gamousa.com//Catalog.aspx?Product=286  It has a new unique thumbhole stock!
I sent Gamo an email asking how I could purchase the Whisper VH synthetic thumbhole style stock. I will post the answer(If I get one!)
Logged
08 GAMO WHISPER CDT trigger/Nerf football enhanced synthetic stock
Crosman 2100 Classic(circa 1990)
Crosman 760(circa 1980ish)
REPUBLIC OF NEW JERSEY

Offline DAMAGE

  • Full Member
  • ***
  • Posts: 245
    • http://
RE: Thumb hole stock
« Reply #7 on: March 10, 2008, 01:24:36 AM »
So does anybody have a custom stock for their gamo ??? I know some have had them made & it would be nice to see them as I am on the design warpath once again, Now that I have completed my first stock as much as I want to and learned a lot in the process I am ready to start a third and this time I may take a little time lol work will see to that anyways.
For those of you that aint seen my first attempt well here it is & I don,t think I will be doing any more to it.
Thanks to Bob/CDT if it wasn't for you this rifle would not be shooting anywhere near as good as it is if at all, Cant thank you enough for the help and advice M8.

Regards
          Sean.




I know the fore end of the stock looks a little wide but it serves a purpose in FT especially in my fave sitting position.
I have not made any changes to to my Shadow stock but will be soon.
Logged
Sean
           M.C.A.S.A
Mid-Central Airgun Shooters Assn
 MCASA-Small Game Hunters Club
           Wanganui
          New Zealand

http://www.nzairgunners.com/nzairgunforum/index.php

Offline Splash

  • Hero Member
  • *****
  • Posts: 2123
    • http://www.airgunspa.com
RE: Thumb hole stock
« Reply #8 on: March 10, 2008, 01:42:22 AM »


I've got one that I'm working on now, should be ready for show in a few days. It will be similar to this one, only made out of mahogany.



Never mind I couldn't find the pic. :0  



Mike

Logged
Mike
We can\'t control the wind, but we can adjust our sails.
http://www.airgunspa.com
http://www.airgunone.com
http://www.airguntricks.com

Offline DAMAGE

  • Full Member
  • ***
  • Posts: 245
    • http://
RE: Thumb hole stock
« Reply #9 on: March 10, 2008, 10:46:27 AM »
Look forward to seeing it Mike.
Logged
Sean
           M.C.A.S.A
Mid-Central Airgun Shooters Assn
 MCASA-Small Game Hunters Club
           Wanganui
          New Zealand

http://www.nzairgunners.com/nzairgunforum/index.php

Offline SGTMEATSAUCE

  • Jr. Member
  • **
  • Posts: 96
    • http://
Re: Thumb hole stock
« Reply #10 on: March 10, 2008, 02:10:37 PM »
Gamo's reply to my inquiry on the Whisper synthetic thumbhole stock:
Hello,

Unfortunately, the Whisper VH stock is not sold separately.

Thank you,
Customer Service
Gamo USA Corp.
Logged
08 GAMO WHISPER CDT trigger/Nerf football enhanced synthetic stock
Crosman 2100 Classic(circa 1990)
Crosman 760(circa 1980ish)
REPUBLIC OF NEW JERSEY

Offline Splash

  • Hero Member
  • *****
  • Posts: 2123
    • http://www.airgunspa.com
here ya go Sean
« Reply #11 on: March 13, 2008, 12:41:22 AM »


It's still needs some attention, but it's getting close.



Mike

Logged
Mike
We can\'t control the wind, but we can adjust our sails.
http://www.airgunspa.com
http://www.airgunone.com
http://www.airguntricks.com

Offline gamo2hammerli

  • Hero Member
  • *****
  • Posts: 6261
    • http://
Re: Thumb hole stock
« Reply #12 on: March 13, 2008, 03:58:05 PM »
At least you got a reply.....  When I bought my Big Cat....2 torx screws were missing for the scope mount.  I emailed them and even typed in the "Control Packing" number...and asked if they could mail me two screws.  No reply, so after a week I went to a hunting shop and got them....the tech had to rummage thru his box of extra parts to find the screws that fit.  Costed me $2.00.....
Logged
Gamo: Expotec .177 + Big Cat .177 + Viper .177 + Whisper .177, Hammerli Titan .177, Diana model 24 .177, RWS-Diana P5 Magnum pistol .177, Crosman: G1 Extreme .177 + Storm XT .177 + Sierra Pro .177 + 1377 pistol .177, Air Arms S410SL .22, BSA Scorpion T10 .22, FX Cyclone .177, Remington Air Master 77 .177 + BB\'s,

Offline DAMAGE

  • Full Member
  • ***
  • Posts: 245
    • http://
RE: Thumb hole stock
« Reply #13 on: March 16, 2008, 08:41:59 AM »
Thats looking really good Mike keep us posted on your progress.

Cheers
        Sean.
Logged
Sean
           M.C.A.S.A
Mid-Central Airgun Shooters Assn
 MCASA-Small Game Hunters Club
           Wanganui
          New Zealand

http://www.nzairgunners.com/nzairgunforum/index.php
Pages: [1]   Go Up
« previous next »