Author Topic: Back inside the Walther Falcon Hunter  (Read 24936 times)

Offline dave2288

  • Hero Member
  • *****
  • Posts: 1031
    • http://
Re: Back inside the Walther Falcon Hunter
« Reply #15 on: September 08, 2008, 02:28:03 PM »
oh man...i wish i jumped in on this one...i've been wanting one in .25...i love the "big guys" of the break barrels ...oh well...let us know how this one turns out, too.
Dave

g1 extreme(turbo tuned cdt trigger, choker muzzle break and fix hinge), powerline 1000s(lube tuned...soon to get a makeover), benjamin ss .22 tuned and shortened, patriot .25(british)

Offline timofb

  • Full Member
  • ***
  • Posts: 151
    • http://
Yeah always better to go with Diana for another 100$
« Reply #16 on: September 08, 2008, 02:50:58 PM »
I just send back to PA a bad IZH 513 had a bad crossbolt pin, so the barrel was loose like a swing when the gun was cocked, plus the gun was rough all around, but had a great stock finish :) . Sucks! All these guns need to be hand picked for sure, and then tuned. And QC needs to be way better.

Hatsan on top of rough quality has a poor quality steel and barrel, I heard of bent barrels. I read about people changing barrels on them. So they are a great project guns. I start to agree with people that say maybe a BAM would be a better choice after all between IZH and Hatsan. Hower I looked at pics of taken down B40 and man it made me sad as well to see how rough these guns are made.

But for IZH to be putting out that type of work like the one I got is a darn shame.... and that made me upset....
850.22 HPA
PX4 Storm

Offline timofb

  • Full Member
  • ***
  • Posts: 151
    • http://
Re: Back inside the Walther Falcon Hunter
« Reply #17 on: September 08, 2008, 03:10:34 PM »
Dave,  you are doing a great job with this gun. Yeah it is all about the learning experience... let umarex people know your complaints, e -mail pics to Ryan Hunt , he seemed to be the one promoting this gun alot :) Walther did a big mistake putting their logo on it, it will hurt their reputation just like it hurt Webley. I think that the Chinese since they copy so many guns at such fast pace actually have gotten better then IZh and Hatsan and will continue to get even better.

 So that B28 has to be a good gun. I want one of those too. All the Diana parts should fit, but then again I doubt if they can reproduce the fine barrel that 350 has. I hear D350 takes 100 yard shots with ease.
850.22 HPA
PX4 Storm

Offline erskine

  • Full Member
  • ***
  • Posts: 245
    • http://osiris.urbanna.net
Re: Back inside the Walther Falcon Hunter
« Reply #18 on: September 08, 2008, 03:15:56 PM »
The email address is micers@kaballero.com.  I will happily mail you the remains at my cost.  Just send me an address via E-Mail.
Even a blind pig finds an acorn once in a while.
http://www.blindpig.org/micers/blog.html

Offline timofb

  • Full Member
  • ***
  • Posts: 151
    • http://
Re: Back inside the Walther Falcon Hunter
« Reply #19 on: September 08, 2008, 03:23:50 PM »
pyramid air never posts negative reviews. I had 2 bad Nighstalkers that I wrotr about those guns quality they have never posted it. I wrote a gret review of my 850 they posted that. So yeah that sucks, that's why I don't write any reviews on there anymore. And i like talking with Kevin from straightshooters, he told me straight this gun and those turkish patriots are  plain junk. That's why used  UK made Webleys have gone so much in price.... yep :(
850.22 HPA
PX4 Storm

Offline Elgin

  • GTA Donations
  • ******
  • Posts: 40
RE: Back inside the Walther Falcon Hunter
« Reply #20 on: April 25, 2009, 02:02:01 PM »
How did you take off the plastic muxxel break?  I already removed the small hex screw, but the break will not come off..

Offline Gene_SC

  • Hero Member
  • *****
  • Posts: 11378
    • http://www.airguntoys.com
Re: Back inside the Walther Falcon Hunter
« Reply #21 on: April 25, 2009, 02:09:21 PM »
If you take off the site, under the site is more screws that hold the muzzle brake on.
THE ONES I SLEEP WITH: BSA Lightning XL, AA TX-200, AA ProSport, BSA Ultra, HW-97K, Crosman NPSS .177, FX Cyclone, HW-30 Nicle Plated, AA-S200, Crosman Marauder, CZ-634, R-9 DG, Webley/Scott UK Tomahawk, Benji Kantana, Benji Marauder, Benji Discovery.....
....

Gene\'s Tunz n Toyz
Springer Tunin

Offline Elgin

  • GTA Donations
  • ******
  • Posts: 40
Re: Back inside the Walther Falcon Hunter
« Reply #22 on: April 25, 2009, 02:14:53 PM »
Thank you.

Offline Elgin

  • GTA Donations
  • ******
  • Posts: 40
Re: Back inside the Walther Falcon Hunter
« Reply #23 on: April 25, 2009, 02:16:48 PM »
Has anyone found an after market trigger for this rifle?  I was not able to view any of the wooden stock photos, not sure why, any where else I could get a glimpse?

Offline Elgin

  • GTA Donations
  • ******
  • Posts: 40
Re: Back inside the Walther Falcon Hunter
« Reply #24 on: April 25, 2009, 02:19:44 PM »
Let me re ask my question.  The front plastic sight is what I am trying to take off.  I thought it was called a muzzel break, evidently not.  It has a small hex screw on the side, however when you remove the screw the plastic site does not come off no matter how much I pull or twist.

Offline daveshoot

  • Hero Member
  • *****
  • Posts: 1593
    • http://
RE: Back inside the Walther Falcon Hunter
« Reply #25 on: April 25, 2009, 04:45:31 PM »
After removing the set screw, I angled a piece of hard maple so the edge of the woodrested on the brake, and rapped it with a rubber mallet. I worked my way around the diameter. There is not much ledge to rest the maple on, but enough. I don't recall any evidence of glue. You can see the ridges that just sort of bind the plastic in place.
Steroid Sheridan rocker, Daisy 990, SS1000, B26-2, QB-57, Crosman 150 (TW), Crosman 1377 x 2,  RWS5G, MP513, IZH53, RWS9N/Cometa, MP661k Drozd, Walther Falcon Hunter, RWS 34 Panther, XS-B3-1, Cummins B3s, RWS94 Cometa x 2, RWS48, Beeman R7, Daisy Avanti 853, RWS92 Cometa 220, Beeman P3, IZH-46M x 2, Daisy Avanti 747, Diana 24, B5-10, BSA Lightning .22, Crosman Marauder #39 .22, Crosman 1322 Phase 1, Diana Model 20, HW70, Shin Sung Dragon Slayer .50, Haenel Model 26, Slavia 620, HW45/.177

Offline joeblow

  • Full Member
  • ***
  • Posts: 160
    • http://
RE: Back inside the Walther Falcon Hunter
« Reply #26 on: April 26, 2009, 05:29:41 AM »
hey guys jm has seals for these things!! the seals also work well for the benji super streak.
benji superstreaks .22, both fully tuned and modded with seals and springs and custom internals. hammerli titan .177, fully tuned and custom shroud. and the addiction continues...

Offline Elgin

  • GTA Donations
  • ******
  • Posts: 40
RE: Back inside the Walther Falcon Hunter
« Reply #27 on: April 27, 2009, 04:55:33 AM »
How did you end up dealing with the crown?

Offline daveshoot

  • Hero Member
  • *****
  • Posts: 1593
    • http://
RE: Back inside the Walther Falcon Hunter
« Reply #28 on: April 27, 2009, 06:27:52 AM »


I really couldn't.Becausethe factorytrue muzzleis recessed, possiblya liner (?),there is no way within my feeble powers to address it. The way to deal with the crown is to chop and re-choke, and I didn't want to go there. I wouldn't take much off if that's the way I was going, though. You wouldn't want to lose much leverage on this beast. Also, I have no good means to re-choke after a chop job.



Steroid Sheridan rocker, Daisy 990, SS1000, B26-2, QB-57, Crosman 150 (TW), Crosman 1377 x 2,  RWS5G, MP513, IZH53, RWS9N/Cometa, MP661k Drozd, Walther Falcon Hunter, RWS 34 Panther, XS-B3-1, Cummins B3s, RWS94 Cometa x 2, RWS48, Beeman R7, Daisy Avanti 853, RWS92 Cometa 220, Beeman P3, IZH-46M x 2, Daisy Avanti 747, Diana 24, B5-10, BSA Lightning .22, Crosman Marauder #39 .22, Crosman 1322 Phase 1, Diana Model 20, HW70, Shin Sung Dragon Slayer .50, Haenel Model 26, Slavia 620, HW45/.177

Offline Elgin

  • GTA Donations
  • ******
  • Posts: 40
Re: Back inside the Walther Falcon Hunter
« Reply #29 on: April 27, 2009, 05:33:50 PM »
I really like the rifle, I purchased it with the gas ram piston.  However, this is my second one.  The first one snapped in half upon cocking, it hurt!  I sent it back, got another.  I am getting great groups with different pellets, 20 and 30 yards as I expected, but I get really great results at 40, 50, and 60 yards.  It is capable of flinging 14gr to 18gr pellets 60 yards with accuracy and penetrating 3/4 inch cedar fence planks.  Not sure why the forum speaks so poorly about it.  The reason I wanted to take the plastic part apart I wanted to recreate the Gammo whisper ND52.  I made a prototype that worked great, except it was too long, and heavy.  I used their design, and modified it by insulating the baffles similar to a Logan style.  The only thing I really would like to change is the trigger to a metal one, but I do not think there is an after market one yet, unless you know of one?  The stock stinks, but it works you just have to be careful with it.  Instead of using the 11mm dove tail to mount the scope I chose to use the Picatinny Weaver mounts it allows you to remove the scope stop for it is no longer needed, and set the scope back further, plus I am not sure if this is a feature of the scope, but the very back of the scope behind the light switch rotates another inch back.  It only goes about an inch, and it does not seem to loosen anything.  It defiantly has something to do with focus, however it could be used to set the scope back even further, but not necessary with the weaver style mounts.  I am a 190lbs 5'9" 32 year old man, and I plink with it for hours, some times drunk, and I think all that think it hard to cock should man up, it is not that hard, however I also bow hunt, and I think I have muscles that most do not.  I am currently unemployed so I have nothing better to do.  I prefer the agreement predator it seems to fly straight, and cuts paper clean, and seems to group the tightest.  As opposed to the cross man premier 14.3 (great for plinking shots out to 40 yards, but the grouping gets worse), the beeman silver arrow 17.1 gr (I was excited about is the worst, no matter what range), the Beeman Crowmag 18.2gr ( I believe is worth it at medium to long range, but does not cut the paper clean, so I assume it is tumbling).  These are all in .22 which I believe is much better than the .25 simply because you can get the same weight in .22 and get better FPS, and FPE results, even at longer ranges.  The next pellets I will buy will be the 26gr Big Boy, 28gr Eunjin and the Eunjin 32gr, any of you have experience with any of these pellets?  I know I have said a lot about this gun, and have referred back to the discussion, but I read all these negative reports, and I have either found suitable solutions, or just simple exercise that eliminates all the discussed problems, except the trigger, and stock I agree with all.  I think it is a good all round rifle, and I am able to shoot it with ease, and accuracy.