Author Topic: Finally got all the parts (pic's)  (Read 7790 times)

Offline Walt

  • Sr. Member
  • ****
  • Posts: 267
    • http://
Finally got all the parts (pic's)
« on: May 12, 2010, 03:51:26 PM »
It's been a couple of weeks for all the parts to get here so I could get the refurb of my Gamo remanufactured 220 underway. After a flurry of on line ordering the all important gold trigger arrived first followed by JM seal, spring and lubes, custom spring guide, BSA scope and mount. I also ordered a 440 stock from Gamo but I received one for a Hunter Elite, I hope in error. No response from them about the error. Nothing new there. I want that 440 stock I think it will really dress up the whole project. Anyway I tore the gun down did a good cleaning, de burred everything I could find that was rough and another clean then started the lube and reassembly. I found three good articles on how the lube process should go all were unfortunately for me a bit different so I went with what  made the most since to me and it turned out great. Not a hint of dieseling just that nice solid thump without  spring twang that we all crave. It's always fun, it's just over too soon. Now for a break in and then get some shooting in.
W

Offline djmyers

  • Sr. Member
  • ****
  • Posts: 489
    • http://
RE: Finally got all the parts (pic's)
« Reply #1 on: May 12, 2010, 10:40:24 PM »
She looks good. Bet it shoots nice after all that work. Nice spring compressor. Anodized aluminum always looks cool.
Gamo Hunter gas piston GRT 3 leapers 3-9x40ao
Big Cat GRT 3 leapers tactedge  
Diasy 120
RWS 350 mag PG2 leapers 4-16x50ao
Crossman 2200
Crossman 2250
Crossman 1377
Daisy 880
2 Chinese underlevers
2 European break barrels.

Offline gamo2hammerli

  • Hero Member
  • *****
  • Posts: 6261
    • http://
Re: Finally got all the parts (pic's)
« Reply #2 on: May 13, 2010, 12:33:07 PM »
Wow....great job.  And that IS a very nice spring compressor....probably the best looking one on the GTA so far.  I think Kiwi have one very similar....only his don`t have the GOLD BLING.
Gamo: Expotec .177 + Big Cat .177 + Viper .177 + Whisper .177, Hammerli Titan .177, Diana model 24 .177, RWS-Diana P5 Magnum pistol .177, Crosman: G1 Extreme .177 + Storm XT .177 + Sierra Pro .177 + 1377 pistol .177, Air Arms S410SL .22, BSA Scorpion T10 .22, FX Cyclone .177, Remington Air Master 77 .177 + BB\'s,

Offline redroush00

  • Full Member
  • ***
  • Posts: 175
    • http://
Re: Finally got all the parts (pic's)
« Reply #3 on: May 25, 2010, 11:36:25 PM »
Cool...and your light cover is camo too!!
Ruger Airhawk
Gamo Hunter Sport.
Gamo Big Cat 1200

Offline Truman

  • Sr. Member
  • ****
  • Posts: 485
    • http://
RE: Finally got all the parts (pic's)
« Reply #4 on: May 26, 2010, 08:21:31 AM »
I don't know which I'm more impressed with, the compressor or the gun!! Great skills!
cuiusvis hominis est errare, nullius nisi insipientis in errore perseverare.

Offline Bogey

  • Hero Member
  • *****
  • Posts: 976
    • http://
RE: Finally got all the parts (pic's)
« Reply #5 on: May 26, 2010, 09:01:07 AM »
Big Atta Boy on a job well done.    Your spring compressor makes mine look  like an   Ugly Duckling.
Gentleman of Fortune.

Hum-bug!

Offline kp4att

  • Hero Member
  • *****
  • Posts: 990
    • http://
Re: Finally got all the parts (pic's)
« Reply #6 on: May 26, 2010, 05:19:04 PM »
THE SPRING COMPRESSOR LOOKS VERY INTERESTING!!!!   GOOD JOB!!!

/GERALD
-------------------------------------------------------------
GERALD (KP4-ATT): PUERTO RICO ISLAND!!!
-------------------------------------------------------------

(Feb 3, 2010)
SUMATRA 500cc .22 - mira: Centerpoint 6-24 x 50 mm

MARAUDER .177 - mira: Leapers 8-32 x 56 mm (30mm)

RWS 48 .177 -     mira: Leapers 4-16 x 50 mm

RWS 350 .22  -  mira Centerpoint 3-9 x 50 mm

GAMO WHISPER VH .177 - mira BSA Panther 2.5-10 x 44 mm

953 .177 (INDOOR) - mira Simmons 3-9 x 32 mm

Offline Walt

  • Sr. Member
  • ****
  • Posts: 267
    • http://
Re: Finally got all the parts (pic's)
« Reply #7 on: May 26, 2010, 06:24:22 PM »
Good job, not on my part. It's a B-Square and I got it from Compasseco in I think 07. No longer made is what I hear.
W