« previous next »
Pages: [1]   Go Down

Author Topic: Cometa and Triggers  (Read 5204 times)

Offline COMETA

  • GTA Donations
  • ******
  • Posts: 6
Cometa and Triggers
« on: May 17, 2010, 01:03:35 PM »
We are the Cometa airgun distributor for the USA and Canada.

Although disappointing to hear of a customer having problems with our triggers, the problem is more of how trigger adjustments are being made.

The Cometa Fenix and Fusion rifles both have fully adjustable 2-stage triggers. These triggers have a minimum pressure requirement of just under 2 pounds. However, if the trigger is adjusted too lightly, the gun will fail to cock.

Should this ever happen, the fix is very easy. Turn the tiny adjustment screw 1/2 turn clockwise and press/depress the trigger several times - this resets the trigger. Repeat as necessary until the gun cocks.

For any other questions, please contact us.

James Manou
General Manager
Manou Bros.
http://www.manoubros.com
Logged

Offline Gene_SC

  • Hero Member
  • *****
  • Posts: 11378
    • http://www.airguntoys.com
Re: Cometa and Triggers
« Reply #1 on: May 17, 2010, 03:44:07 PM »
James, unfortunatly that was not the case with the new 400 I had bought back early last year. I am familiar with the adjustment being to light and it is also a safety hazard. My gun was shooting just fine and the all of a sudden it would not fully cock every time. First thing I checke was the adjustmen. That was not it with mine. I ended up buying a new trigger assymbly from TF Chambers in the UK. Worked just fine when I put her in..:) The gun sure was beautiful and Cometa has done a fine job with the wood stocks.
Logged
THE ONES I SLEEP WITH: BSA Lightning XL, AA TX-200, AA ProSport, BSA Ultra, HW-97K, Crosman NPSS .177, FX Cyclone, HW-30 Nicle Plated, AA-S200, Crosman Marauder, CZ-634, R-9 DG, Webley/Scott UK Tomahawk, Benji Kantana, Benji Marauder, Benji Discovery.....
....

Gene\'s Tunz n Toyz
Springer Tunin

Offline geewhiz380

  • Hero Member
  • *****
  • Posts: 1878
    • http://
Re: Cometa and Triggers
« Reply #2 on: May 18, 2010, 05:34:59 AM »
Pardon me for intruding however i also have a cometa fenix 400 from last year end of may and honestly i love there accuratecy ,power,noise level,stock,shootin cycle but i m havin the same problem.I to went through an adjustment period in the trigger area and same problem with the cocking .I untightened all screws and did process again but i didnt mess with the action at all so i wouldnt have other problems but i will have to purchase a trigger from someone that would help me .Right now its cockin but i dont want any incidents so i will wait until sometime in july to get it repair which will cost more money and i dont mind but it would be nice if someone in the company could help in this situation or find other solutions .Thanks for your time.. Jorge lopez
Logged

Offline COMETA

  • GTA Donations
  • ******
  • Posts: 6
Jorge, send your Cometa to us............
« Reply #3 on: May 18, 2010, 04:18:05 PM »
and we will make the necessary repairs at no charge to you.  Contact us at:  info@manoubros.com

We are the Cometa distributor for the USA and Canada, and we do carry all the replacement parts to do a thorough repair.

Kind Regards,

James Manou
General Manager
Manou Bros.
http://www.manoubros.com
Logged

Offline geewhiz380

  • Hero Member
  • *****
  • Posts: 1878
    • http://
Re: Cometa and Triggers
« Reply #4 on: May 18, 2010, 05:07:24 PM »
Thank you kindly....jorge
Logged
Pages: [1]   Go Up
« previous next »