Mike's stock duplicator

[Splash]

Ok. Would you like a t-hole, target,or sporter style and what LOP?

Mike

[Machinist]

Fix, are you going to supply Mike with different sizes of "ball" end stylus? Like 1/4" ball for use with a 1/4" ball nose cutter and 3/16" ball for use with a 3/16" cutter etc.?

[Splash]

I was planning on grinding each end for a different bit. I will mainly be using it for inletting of the actions, to keep from having to make seperate jigs for each one.

Mike

[Splash]

Paul, I can get more rod locally, to make up more tips. Let me know what style stock you would like and Thanks again.

Mike

[Splash]

You got it. Would you like a tyro style cheek well, kinda like this, or a straight comb?

Mike

[Splash]

No need for a riser on the 2 above, med mounts work fine. I slipped an action in the top one the other day and had no problems using the irons. Thanks for the heads up on 2 boxes.

Mike

[Splash]

I was going to make something very similar for there and on each end of the long rails.

Thanks again, Mike

[Splash]

I was going to weld the bracket to the slide and screw the rail to the bracket. That way there will be no worries, on movement and can still be taken apart, if need be.

Mike

[Splash]

I haven't had a chance to set it up yet. My buddy that I was going to get the rails from, is working out of town, for the next few weeks.

Mike

[Splash]

Thanks Paul. Do you need my addy again?

Mike

[Splash]

I've got them covered.