Author Topic: Sorry guys,but  (Read 4803 times)

Offline Splash

  • Hero Member
  • *****
  • Posts: 2123
    • http://www.airgunspa.com
Sorry guys,but
« on: July 22, 2008, 03:39:54 PM »
I call them as I see them. I like to do a little carving on a piece of wood. I don't claim to be a stock maker, but I think I can get the job done. I've had a little project in the works, but due to unforeseen circumstances, it has taken too long. So the party, ordering some wood, which I haven't talked to, is pi$$ed, rightly so. I'm not naming any names, but I'm done, you know. Sorry guys, but I haven't been able to get a responce.
Mike
We can\'t control the wind, but we can adjust our sails.
http://www.airgunspa.com
http://www.airgunone.com
http://www.airguntricks.com

Offline 3n00n

  • Hero Member
  • *****
  • Posts: 1163
    • http://
Art is difficult to schedule.
« Reply #1 on: July 22, 2008, 04:21:20 PM »
Sculpting wood by handis different than putting it on a duplicatingmachine. Likehand checkering taking more time than withmachines. Alot more character, but sculpting by hand takes alot more time.
`
Anyone that has done it themself, know. They that haven't done it, believe it's no big deal. Time is a big deal in art, it doesn't just 'happen' by it self.

Offline Splash

  • Hero Member
  • *****
  • Posts: 2123
    • http://www.airgunspa.com
RE: Art is difficult to schedule.
« Reply #2 on: July 22, 2008, 04:43:30 PM »
Thank you J. I hope the party, realizes it. I don't know never talked with them and been waiting, a month for a return call. Care to guess who it is?
Mike
We can\'t control the wind, but we can adjust our sails.
http://www.airgunspa.com
http://www.airgunone.com
http://www.airguntricks.com

Offline airgun/cuz

  • Hero Member
  • *****
  • Posts: 1135
    • http://www.longislandairguns.com
RE: Art is difficult to schedule.
« Reply #3 on: July 23, 2008, 12:42:34 AM »


Splash,you should mention that the party you keep referring to is me,,,,,,,,,you should also mention that out overything you said you could provide,not one item has not been produced....not even a target,,,,,,,,why do write in such an under-cover way,,,,,,,,we have tried to work with you for a few months & all we did was send you a TALON & a 2240 & we have received not one thing,,,,,never once have I or anyone-else pressured you into anything,yet once again you as well as a few others insist on trying to make us or myself look like the bad guys,if I don't call you back,there is a reason for it......one being that I run my own little business & second I work for COBRA AIR GUNS in the afternoons, third I have other obligations in my life,three I was tired of hearing all your excuses,I could accept one,two maybe in even three,but not for nothing you have an excuse for everything,except for posting your under the table digs at someone who has done nothing but take you up on an offer to build spring compressors,CONDOR/TALON grips & targets,etc.I don't think for one minute that it takes three or more months to put five pieces of would together & call it a target,,,,,,,The only excuse you haven't given me was the one for the $600 TALON we shipped you,,,,,,,I am sure that in time you might have an excuse for posting pics of what we sent you but have failed to post what you have made for us,,,,,,,,,THAT'S RIGHT,YOU HAVE NOT MADE ANYTHING!

BTW....This is what we lent you to produce grips,,,,,,,We would have let you keep the TALON in exchange for your work....

http://www.gatewaytoairguns.com/airguns/forums/thread-view.asp?tid=8572&posts=15&highlight=SPLASH%20SANTA&highlightmode=1#M62788





JOE CUZ/AKITA BREEDER
Any fool can learn from his own mistakes
It takes a wise man to learn from the mistakes others!
L.I.F.T. : Long Island Field Target
Web site: Cobra Air Guns
http://www.airgunsbbguns.com/

Joe Cuz
 http://www.longislandairguns.com


ANY FOOL CAN LEARN FROM HIS OWN MISTAKES,IT TAKES A WISE MAN TO LEARN FROM THE MISTAKES OF OTHERS!              

Offline Splash

  • Hero Member
  • *****
  • Posts: 2123
    • http://www.airgunspa.com
RE: Art is difficult to schedule.
« Reply #4 on: July 23, 2008, 02:25:27 AM »
Well Joe, why not tell the whole story? If you remember, I told you in the beginning, that I was not going to make the compressors, due to the liability issue. Over a month ago, I told you that I was putting everything on hold, until my new shop was built. That if that was not OK, to let me know and I would send this stuff back. I never heard anything, until a few days ago, where's our grips and boxes. Perhaps it's just a misunderstanding,don't know, but I do know there's a large lack of communication.
Mike
We can\'t control the wind, but we can adjust our sails.
http://www.airgunspa.com
http://www.airgunone.com
http://www.airguntricks.com

Offline CharlieDaTuna

  • Hero Member
  • *****
  • Posts: 3405
    • http://www.charliedatuna.com
RE: Sorry guys,but
« Reply #5 on: July 23, 2008, 02:35:20 AM »
That's enough guys. Take it to the phone or e-mail.

Frozen by Bob
Bob  aka:  CharlieDaTuna
Co-founder of the GTA


HOME OF THE GRT-III TRIGGER
   Website:  http://charliedatuna.com/

Home of the NPSS-NP Triggers:  
            http://charliedatuna.com/NPSS.htm

E-Mail:  CDT22@Verizon.net

Benji-342 .177 /Brazilian Winchester 800 .22 /Gamo Cadet .177 /Gamo Shadowmatic .177 /Gamo 440 .22 /Gamo Royal .22 /Gamo Whisper .177 /Gamo SK-1 .20 /B-20 .177 /TF-99 .177 /QB-78 .177 /QB-78t .22 /QB-78-(CD) .22 /QB-78-(CJ) .22/QB-78D .22 /Crosman 2240 .22 /Cros 150 .177 /Crosman Back Packer .22 ?Crosman AS 2250 .22 /Daisy Mod 93 .177 /Marksman 2004 .177 /GS 35 .177 /FWB-124 .177 /Custom Marauder .22 /Custom Disco .177